Denon AVR-3805 Operating Instructions Manual page 21

When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel
level adjustments made will affect all surround modes. Consider this mode a Master Channel Level
adjustment mode.
After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the
individual surround modes and adjust channel levels that will be remembered for each of those modes.
Then, whenever you activate a particular surround sound mode, your preferred channel level adjustments
for just that mode will be recalled. Check the instructions for adjusting channel levels within each
surround mode. (See page 41)
You can adjust the channel levels for each of the following surround modes: PURE DIRECT/DIRECT,
STEREO, DOLBY/DTS SURROUND, 5/7 CH STEREO, WIDE SCREEN, SUPER STADIUM, ROCK ARENA,
JAZZ CLUB, CLASSIC CONCERT, MONO MOVIE, VIDEO GAME, MATRIX and VIRTUAL.
When using either surround speakers A or B, or when using surround speakers A and B at the same time,
be sure to adjust the balance of playback levels between each channel for the various selections of "A
or B" and "A and B".
2-4 Setting the crossover frequency
• Set the crossover frequency mode according to the speaker system being used.
1
Select the "Crossover Frequency" at the
Speaker Setup Menu.
CH SEL
CH SEL
ENTER
ENTER
* S p e a k e r
(Remote control (Main unit)
C r o s s o v e r
unit)
2
Display the Crossover Frequency screen.
CH SEL CH SEL
ENTER ENTER
(Remote control (Main unit)
unit)
3
Select the frequency.
CH SEL
CH SEL
ENTER
ENTER
* C r o s s o v e r
(Remote control (Main unit)
• 40 / 60 / 80 / 100 / 120 / 150 / 200 / 250 Hz
unit)
can be selected.
4
Enter the setting.
CH SEL CH SEL
The Speaker Setup Menu reappears.
ENTER ENTER
(Remote control (Main unit)
unit)
S e t u p
F r e q .
F r e q
8 0 H z
2-5 Setting the low frequency distribution
This screen is not displayed when not using a subwoofer and all speakers are set to small size.
• Set the subwoofer mode according to the speaker system being used.
1
Select the "Subwoofer Mode Setup" at the
Speaker Setup Menu.
CH SEL
CH SEL
ENTER
ENTER
* S p e a k e r
(Remote control (Main unit)
S u b w o o f e r
unit)
2
Display the Subwoofer Mode screen.
CH SEL CH SEL
ENTER ENTER
(Remote control (Main unit)
unit)
3
Select the setting.
CH SEL
CH SEL
ENTER
ENTER
* S u b w o o f e r
(Remote control (Main unit)
unit)
4
Enter the setting.
CH SEL CH SEL
The Speaker Setup Menu reappears.
ENTER ENTER
(Remote control (Main unit)
unit)
S e t u p
M o d e
M o d e
L F E
ENGLISH
21