Table of Contents
Advertisement
LANGUAGE
Menu Language
Select a language for the Setup menu and on-screen
display.
Disc Audio/ Disc Subtitle/ Disc Menu
Select the language you prefer for the audio Track (disc
audio), subtitles, and the disc menu
Original: Refers to the original language in which the
disc was recorded.
Other: To select another language, press numeric keys
then ENTER key to enter the corresponding digit num-
ber according to the language code list in the reference
chapter. If You enter the wrong Language code, press
CLEAR key.
DISPLAY
TV Aspect
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 wide TV is connected.
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to "4:3".
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide Picture on the
entire screen and cuts off the portions that do not fit.
Progressive Scan
If you are using the COMPONENT VIDEO jacks, but are
¡
connecting the DVD Player to a standard (analog) televi-
sion, set Progressive Scan to Off.
If you are using the COMPONENT VIDEO jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Note
Note
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan com-
patible TV or monitor. If you set Progressive Scan to On
in error, you must reset the unit.
1 Press 7 (stop) key to stop any disc that is playing.
2 Press 7 (stop) key again for more than 5 seconds.
The video output will be restored to the standard setting,
and a picture will once again be visible on a conventional
analog TV or monitor.
TV Output Select (only for Europe)
Set the player's TV Output Select options according to
the TV connection type.
RGB: When your TV is connected with the SCART jack.
Y C
C
: When your TV is connected with the COMPO-
B
R
NENT VIDEO jacks on the DVD player.
Set Up functions
17
EN
Advertisement
Table of Contents
