When "Visual" Is Selected In "Set Up Menu - Kenwood DV-4070 Connection And Setup Manual

Multiple dvd vcd cd player
Hide thumbs Also See for DV-4070:
Table of Contents

Advertisement

"Digital Audio PCM Down Conversion" Setting
¶ Switches on/off the down-sampling conversion
for the digital signal output with a high sampling
rate.
"Digital Audio Dolby Digital" Setting
¶ Sets the Dolby Digital output.
"Digital Audio DTS" Setting
¶ Sets the DTS output.
"Digital Audio MPEG" Setting
¶ Sets the MPEG output.
"Speaker Setting"
¶ This setting is required when the 6CH. OUTPUT
jacks of the player is used in system connection.
"Audio During Search" Setting
¶ Switches on/off the audio during search.
"Dynamic Range Control" Setting
¶ Switches the dynamic range control function.
"Audio Filter" Setting
¶ Sets the audio filters for protecting the connected
speakers.
When "VISUAL" is selected in "SET UP
MENU":
Select "VISUAL" when you want to change the
§
language used to display the menu screens, language
use in menus on the disc, audio language, subtitle
language, etc.
Also select "VISUAL" to set the still mode, FL mode,
§
video format conversion system or TV SCART
connector output signals.
VISUAL
Player Menu Language
Disc Menu Language
Audio Language
Subtitle Language
Still Mode
MENU
FL Mode
NTSC = PAL
¤
SCART Output Select
¤
¶ The "NTSC = PAL" and "SCART Output
Select" settings are not displayed in certain
countries and areas.
"Player Menu Language" Setting
¶ Sets the language used to display the menu
screens of the player.
"Disc Menu Language" Setting
¶ Sets the language used to display the menu screens
of the disc.
"Audio Language" Setting
¶ Sets the language of the disc audio.
"Subtitle Language" Setting
¶ Sets the language of the disc subtitles.
7
English
"Still Mode" Setting
7
English
¶ Reduces blur in still images.
7
English
7
English
"FL Mode" Setting
7
Auto
EXIT
¶ Sets the brightness of the FL display. (on the
Brightness
7
7
On
player front panel.)
7
Composit
"NTSC = PAL" Setting
¶ Switches if the signal from an NTSC format disc
is to be converted into PAL or not.
"SCART Output Select" Setting
¶ Switches the output signals from the TV SCART
connector of the player.
Chapter 2: Various Setups
°
°
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-4900Dvf-r7030Dvf-r9030

Table of Contents