Hands Free Unit Control
• You need to register your cell-phone to your Bluetooth Hands Free Box beforehand. Make sure to read the instruction manual
of the Bluetooth Hands Free Box as well.
Control Screen Function
Displaying the control screen and using various
functions.
1
Display the control screen
Press several times until the Control Screen
appears.
2
Display the source select screen
1
1 Displays the status of connection with the
cell-phone.
White: The cell-phone is connected.
Orange: The cell-phone is not connected,
or it is outside the service range.
3
Display the Hands-Free Control screen
2
3
4
5
SRC
2 Displays the Search for Phone Book screen.
3 Displays the Outgoing Calls screen.
4 Displays the Incoming Calls screen.
5 Switches between the private and hands-
6 Displays the Hands-Free Set Up screen.
7 Enters three phone numbers for quick
8 Enters a phone number.
9 Displays the signal strength.*
p Displays the present Auto Answering status
q Displays the battery drain of the cell-
w Starts the call.
e Ends the call.
r Clears the entered phone number.
t Returns to the previous screen.
y Displays the calling and called phone
16
14
8
(See <Calling by Phone Book>, page 59)
(See <Redialing>, page 61)
(See <Redialing>, page 61)
free modes (only when a call in progress).
(See <Setting up the Hands-Free Phone>,
page 62)
dialing.
(See <Quick Dialing>, page 59)
(See <When Dialing>, page 58)
The more the number of bar segments, the
stronger the signal.
When Auto Answering is on:
When Auto Answering is off:
phone.*
The more the number of bar segments, the
higher the battery level.
Clears the phone number being entered.
numbers.
If you have registered a phone number in
the Phone Book, the destination person
name is displayed.
9
10
11
7
12
13
6
15
AUTO
Next page 3
English
57