Installation, Adjustments And Maintenance; Handle; Down Decorative Moulding - Haier HRF-660S Service Manual

SERVICE MANUAL
Model:HRF-660S
Chapter 3 Installation, adjustments and maintenance
3-1. Install Handle
First, screw part2 into the threaded hole in the door (part1); there are two screws per door. Next,
press part3 with its larger opening onto part2. Finally, pull part3 down in order to attach it firmly to the
door.
3-2. Below decorative moulding
Open the refrigerator and freezer doors, remove the moulding from the refrigerator compartment, and
then affix it as shown in the illustration.
Part 1
Part 2
Part 3
Issue 201001
Rev.
Ref1001S008V0
9