Af (Alternative Frequency) Function; Restricting Rds Region (Region Restrict Function); Auto Tp Seek Function; Monaural Reception - Kenwood Z828MP Instruction Manual

Menu settings

AF (Alternative Frequency) Function

When poor reception is experienced, automatically switch to
another frequency broadcasting the same programme in the
same RDS network with better reception.
The RDS indicator lights up when the AF function is turned on.
Display and setting:
"AF ON" : The AF function is on. (Default setting)
"AF OFF" : The AF function is off.
NOTE
When no other stations with stronger reception are available for
the same programme in the RDS network, you may hear the
incoming broadcast in bits and snatches. Turn off the AF function
in such a case.

Restricting RDS Region (Region Restrict Function)

You can choose whether or not to restrict the RDS channels,
received with the AF function for a particular network, to a
specific region. When the Region Restrict Function is on, the
region is restricted.
Display and setting:
"Regional ON" : The Region Restrict Function is on. (Default
setting)
"Regional OFF" : The Region Restrict Function is off.
NOTE
Sometimes stations in the same network broadcast different
programmes or use different programme service names.

Auto TP Seek Function

When the TI function is on and poor reception conditions are
experienced when listening to a traffic information station,
another traffic information station with better reception will be
searched for automatically. This function is on, when unit is
first powered on.
Display and setting:
"ATPS ON" : The Auto TP Seek Function is on.
If the traffic information station you are tuned to
experiences poor reception, this function
automatically seeks another TP station. (Default
setting)
"ATPS OFF" : The Auto TP Seek Function is off.

Monaural Reception

<In FM reception of Tuner mode>
When poor stereo reception is experienced, this function will
reduce noise and improve listening conditions.
Display and setting:
"MONO ON" : The monaural reception is on.
"MONO OFF" : The monaural reception is off. (Default setting)
Reading the MP3 ID3 tag <in MP3 mode>
ID3 tag information in the MP3 file is configured for use.
Display and setting:
"ID Read ON" : ID3 tag is read. (Default setting)
"ID Read OFF" : ID3 tag is not read.
NOTE
• If you switch this setting during the play of MP3, the track is
replayed from the beginning.
— 44 —