V. LINEARITY (VLIN), V. CORRECTION (SCOR), PIN
AMP (EWPW), AND HORIZONTAL TRAPEZOID
(EWTZ) ADJUSTMENTS
1. Input Monoscope signal/NTSC monoscope signal
(for NTSC model).
2. Activate the Service Adjustment Mode.
3. Select VLIN, SCOR, EWPW, and EWTZ with
and
.
1
4
4. Adjust with
and
for the best horizontal size.
3
6
5. Press [MUTING] then
-
VERTICAL LINEARITY (VLIN)
S CORRECTION (SCOR)
EW PARABOLA/WIDTH (EWPW)
EW TRAPEZIUM (EWTZ)
V. ANGLE (HPAR), H. BOW (HBOW), UPPER PIN
(UCOP) AND LOW PIN (LCOP) ADJUSTMENTS
1. Input Monoscope signal/NTSC monoscope signal
(for NTSC model).
2. Activate the Service Adjustment Mode.
3. Select HPAR, HBOW, UCOP, and LCOP with
and
.
1
4
4. Adjust with
and
for the best picture.
3
6
5. Press [MUTING] then
-
HORIZONTAL PARALLELOGRAM (HPAR)
HORIZONTAL BOW (HBOW)
EW UPPER CORNER PARABOLA (UCOP)
EW LOWER CORNER PARABOLA (LCOP)
to save into the memory.
to save into the memory.
KV-BT212M40/M50/M70/M80/M90/N80
– 33 –
RM-W101 RM-W150