Connecting Your Computer; Using The Digital Video Camera As A Web Camera Or A Mass Storage Drive - DXG DC -202V User Manual

5. Connecting Your Computer

You need to connect the Digital Video Camera to your computer's USB port to
transfer photos into your computer. This section shows how you can connect the
Digital Video Camera to your computer.
You must install the Digital Video Camera Driver from the software CD-ROM
before connecting to ensure your computer functions properly with USB. See the
section "Installing Software" for details on how to install the driver.
Using the Digital Video Camera as a Web camera or a Mass
Storage drive
When you connect Digital Video Camera to your computer, you can use it as a
Web camera or a Mass Storage drive. You can then join video conferencing
sessions on the Internet with your Digital Video Camera. You need to install the
Digital Video Camera Driver and required application softwares from the
software CD-ROM before you can start using it as a Web camera. See the section
"Installing Software" for installation instructions.
Using the Digital Video Camera as a Web camera, it also lets you capture video
directly into your computer and editing or enhancing your videos. See the section
"Installing Software" for installing instructions.
●Step 1 Make sure the Digital Video Camera loads two "AA"
batteries in the compartment.
●Step 2 Connect the smaller end of the USB
cable into the USB port of your Digital
Digital Video Camera.
Note: Make sure to plug-in USB cable in right direction gently to avoid possible
damage to USB connector.
●Step 3 Connect the other end
of the USB cable to the
USB port located on the
back of your computer.
The Digital Video Camera's LCD
Panel will turn on and enter
PC Connection Menu.
28