Locking The Backpanel To The Unit - Kenwood KDC-X879 Instruction Manual

Installation

Locking the Backpanel to the unit

If you want to fasten the faceplate to the main
unit so that it does not fall off.
1
Refer to the Removing the Backpanel function of
the section on 'Theft Deterrent Panel' (page 21)
and remove the Backpanel.
2
Insert the panel lock screws into the holes at the
sides of the panel.
Accessory5
3
Reattach the Backpanel.
• Never insert the panel lock screws in any other screw
holes than the one specified. If you insert them in
another hole, it will contract and may cause damage to
the mechanical parts inside the unit.
58
|
English