Polarized Plug - Salton DF1240 Instruction Booklet

17. To avoid personal injury, always position your fryer well back from the edge
of the counter or table. Always use your fryer on a dry flat, stable, heat
resistant surface.
18. This appliance is not intended to be operated by means of an external timer
or a separate remove-control system.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not modify the plug in any way.
SAFETY RELEASE POWER CORD
The Safety Release power cord attaches to the appliance with a magnetic
connector. This magnetic connector will detach from the appliance if the cord is
pulled on accidentally. DO NOT allow the cord to hang over the edge of the
counter. DO NOT use this appliance with an extension cord.
The magnetic end fits into the socket of the fryer in only one direction. Always
attach the magnetic end of the cord directly to the fryer socket prior to plugging
into a wall outlet. When disconnecting, always remove the plug from the wall
outlet first.
Should the magnetic plug become detached from the appliance during use, it is
important to:
1. Unplug the power cord from the wall outlet
2. Turn off the appliance at the temperature knob or control panel
3. Reattach the power cord to the appliance
4. Reconnect to the wall outlet
5. Turn the appliance back on
If the magnetic power cord becomes damaged in any way, contact Salton
Canada at the address listed at the end of this booklet for a replacement.
DO NOT attempt to permanently attach the power cord to this appliance.
DO NOT use any other power cord on this appliance.
3