D750i, K758c, W800 and W700 Working Instructions - Mechanical
3.6 LCD
REMOVAL
Follow the Removal instructions of section 3.1 – 3.5
Be careful not to damage the LCD flexfilm and the board-
to-board connector with the tweezers!
Disconnect the camera flexfilm board-to-board connector
by lifting upwards with the flexfilm assembly tool.
Remove the two screws using bit NTZ 112 288 (torx bit
no. 6) at the top of the LCD carrier.
Removed screws cannot be reused and must be
scrapped!
When handling the LCD, be careful not to touch the
display glass at any time!
Be careful not to damage the LCD flexfilm with the
tweezers!
Gently lift the LCD with your fingers or with the flexfilm
assembly tool.
3/00021-1/FEA 209 544/95 G
17(43)
©
Company Internal
Sony Ericsson Mobile Communications AB