Firmware Version Display; Demonstration Mode Setting - Kenwood KDC-MP635 Instruction Manual

Menu system
Function of KDC-X791/KDC-MP735U
In Standby mode

Firmware version display

Displaying the firmware version with the unit.
Turn the Control knob.
Select the "F/W Version : " display.
In Standby mode

Demonstration mode Setting

Sets the demonstration mode.
1
Select the Demonstration mode
Turn the Control knob.
Select the "DEMO Mode" display.
2
Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time you press the knob at least 2 seconds,
the Demonstration mode alternates between the
settings shown in the table below.
Display Setting
"DEMO Mode : ON" The Demonstration mode function is ON.
"DEMO Mode : OFF" Exit Demonstration mode (Normal mode).
40
|
English