Station/Disc Naming - Kenwood KDC-MP635 Instruction Manual

Station/Disc Naming (SNPS/DNPS)
Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to
attach a title to
⁄
• A title cannot be attached to MD or Audio file media.
2
Enter Menu mode
Using the Control knob, select "MENU".
For the operation method, refer to <Function
Control mode> (page 10).
3
Select Name set mode
Turn the Control knob.
Select the "Name Set" display.
4
Enter Name set mode
Press the Control knob for at least 1 second.
5
Move the cursor to the enter character
position
Push the Control knob towards right or left.
6
Select the character type
Press the Control knob.
Each time you press the knob, the character type
alternates between the types shown in the table
below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
7
Select the characters
Turn the Control knob or push it towards up or
down.
⁄
• Enter characters by using a remote control with numbers
buttons.
Example: If you are entering "DANCE".
Character Button
"D" [3]
"A" [2]
"N" [6]
"C" [2]
"E" [3]
8
Repeat steps 5 through 7 and enter the name.
9
Times pressed
1
1
2
3
2
Exit Menu mode
Press the [FNC] button.
⁄
• When operation stops for 10 seconds the name at that
time is registered, and Name Set mode closes.
• Memory numbers
- FM/AM: 30 stations
- Internal CD player: 10 discs
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
• Change the title of station/CD by the same operation
used to name it.
19
|
English