Cisco 8945 Quick Start Manual

CISCO IP Phone – 8945
Dial
To dial, lift the handset and enter a number. Or:
• Press an unlit line button
• Press the New Call softkey.
• Press the (unlit) headset button
speakerphone button

Dial from Call History

1. Press the down arrow on the Navigation bar.
2. Scroll to the number and press the Select button in
the Navigation pad or Call Softkey.
Redial the last number
Press the Redial softkey.
© 2011 Cisco Systems, Inc. All rights reserved. Published February 14, 2011, OL-20436-01
.
or
. .
Hang Up
To end a call, replace the handset. Or:
• Press the End Call softkey.
• Press the (lit) headset button
speakerphone button

Answer a Call

To answer a ringing call
• Press the flashing amber line button
• Press the (unlit) headset
button.
• Press the Select button in the Navigation pad.
Call Waiting
If you get a second call while the first call is active, the
second line displays.
To connect the second call and put the first call on hold
automatically, press the flashing amber line button

Multiple lines

If you use multiple lines, press the All Calls softkey to
see all calls on all lines (oldest first). Otherwise, your
phone displays calls that are on the selected line only.
To see which line is selected, look for a blue icon on
the line label (left side of screen) and the line extension
in the header bar (top of screen).
All Calls uses your primary extension.
or
.
, lift the handset. Or:
.
or speakerphone
Page 1 of 4
.