Fuser Section; Detaching And Refitting The Fuser Unit - Kyocera FS-1370DN Service Manual

2L0
1-5-7

Fuser section

(1) Detaching and refitting the fuser unit

Procedure
1. Remove the outer covers (See page 1-5-3).
2. Remove two connectors.
3. Release the wires form wire clamps.
4. Remove the connector.
1-5-16
Wires
Wire clamps
Connector
(Fuser heater lamp)
Connector
(Fuser thermistor)
Figure 1-5-22
Connector
Figure 1-5-23