Synchronize Clock; Dsi (Disabled System Indicator); Selectable Illumination; Switching Display Type - Kenwood KDC-508 Instruction Manual

Cd-receiver
Hide thumbs Also See for KDC-508:
Table of Contents

Advertisement

Synchronize Clock

Synchronizing the RDS station time data and this
unit's clock.
Display
Setting
"SYNC ON"
Synchronizes the time.
"SYNC OFF"
Adjust the time manually.
• It takes 3 to 4 minutes to synchronize the clock.

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
Display
Setting
"DSI ON"
LED flashes.
"DSI OFF"
LED OFF.

Selectable Illumination

Selecting the button illumination color as green
or red.
Display
Setting
"KEY RED"
The illumination color is red.
"KEY GRN"
The illumination color is green.

Switching Display Type

Setting the Display type.
Display
Setting
"DISP C"
Demonstration.
"DISP A"
Normal display type.
"DISP B"
Silent display type.

Contrast Adjustment

Adjusting the display contrast.
Display and Setting
"CONT 0"
"CONT 7" (Original setting)

News Bulletin with Timeout Setting

It switches automatically when a news bulletin
starts even if the radio isn't being listened
to. Also, the time interval when interrupt is
prohibited can be set.
Display and Setting
"NEWS OFF"
"NEWS 00M"
"NEWS 90M"
When "NEWS 00M" — "NEWS 90M" is set, the
News Bulletin Interrupt function is ON.
When it's ON, the "NEWS " indicator is ON.
When the news bulletin starts, "NEWS " is
displayed, and it switches to the news bulletin.
• If you choose the "20M" setting, further news bulletins
will not be received for 20 minutes once the first news
bulletin is received.
• The news bulletin volume is the same level that was
set for 'Traffic Information' (page 13).
• This function is only available if the desired station
sends PTY-code for news bulletin or belongs to
'Enhanced Other Network'-Network sending PTY-code
for news bulletin.
• When the News Bulletin Interrupt function is ON, it
switches to an FM station.
In Tuner mode

Local Seek

Only stations whose reception is good are
searched for in auto seek tuning.
Display
Setting
"LO.S OFF"
The local seek function is OFF.
"LO.S ON"
The local seek function is ON.
21
|
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-5027

Table of Contents