Manual Clock Adjustment; Dsi (Disabled System Indicator); Switching Preout; Crsc (Clean Reception System Circuit) - Kenwood KDC-135 Instruction Manual

In Standby mode

Manual Clock Adjustment

1
Select Clock Adjustment mode
Push the Control knob towards [FM] or [AM].
Select the "CLCK" display.
2
Enter Clock Adjust mode
Press the Control knob for at least 1 second.
The clock display blinks.
3
Adjust the hours
Push the Control knob towards [FM] or [AM].
Adjust the minutes
Push the Control knob towards [4] or [¢].
4
Exit Clock adjustment mode
Press the [MENU] button.
In Standby mode

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
Display Setting
"On DSI" LED flashes.
"OFF DSI" LED OFF.
Function of KDC-135
In Standby mode

Switching preout

Alternating the preout between the rear and
subwoofer. (With the subwoofer the sound outputs
without being effected by fader control.)
Display Setting
"REAR" Rear preout.
"SUB" Subwoofer preout.
In FM reception

CRSC (Clean Reception System Circuit)

Temporarily have reception alternate from stereo to
mono to reduce multi-path noise when listening to
the FM station.
Display
"On CRSC"
"OFF CRSC"
⁄
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
In Standby mode

Built-in Auxiliary input Setting

Set the Built-in Auxiliary Input function.
Display Setting
"OFF AUH" When selecting the source there's no Auxiliary Input.
"On AUH" When selecting the source there's Auxiliary Input.
Setting
The CRSC is ON.
The CRSC is OFF.
13
|
English