Bass Management System); B.m.s. Frequency Offset; Amp Control - Kenwood DPX501U Instruction Manual

Menu system
Other than Standby mode
B.M.S. (Bass Management System)
Adjust the bass boost level of the external
amplifier using the main unit.
Display Setting
"AMP Bass : Flat"/ "BMS FLT"Bass boost level is flat.
"AMP Bass : +6"/ Bass boost level is low (+6dB).
"BMS +6"
"AMP Bass : +12"/ Bass boost level is mid (+12dB).
"BMS +12"
"AMP Bass : +18"/ Bass boost level is high (+18dB).
"BMS +18"
• Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
• For amplifiers, there are the models you can set from
Flat to +18 dB, and the models you can set from Flat
to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass : +18"/ "BMS +18"
will not work correctly even if it is selected.
Other than Standby mode

B.M.S. Frequency Offset

Setting the central frequency, boosted by B.M.S.
Display Setting
"AMP FREQ : Normal"/ Boost with the normal central frequency.
"BMSF NML"
"AMP FREQ : Low"/ Drop the normal central frequency 20%.
"BMSF LOW"
38
|
English
When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the
unit.
1
Select AMP Control mode
Push the Control knob towards [FM] or [AM].
Select the "AMP Control"/ "AMP CTRL" display.
2
Enter AMP Control mode
Press the Control knob for at least 1 second.
3
Select the AMP Control item for adjustment
Push the Control knob towards [FM] or [AM].
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4
Adjust the AMP Control item
Push the Control knob towards [4] or
[¢].
5
Exit AMP Control mode
Press the [MENU] button.
• You cannot use the LX AMP operation during standby
mode.