Table of Contents
Advertisement
Menu system
System Q
Setting display/don't display for the System Q factors (Bass
center frequency, Bass Q factor, Bass extend, Middle center
frequency, Middle Q factor, and Treble center frequency) in
Audio control.
Display
Setting
"System Q :ON"
The System Q factors are displayed.
"System Q :OFF"
The System Q factors aren't displayed.
Built-in Amp Mute Setting <In Standby mode>
Toggles ON or OFF the mute control on the built-in amplifier.
Turning ON this control enhances the preout quality.
Display
Setting
"AMP Mute :OFF"
The built-in amplifier activates.
"AMP Mute :ON"
The built-in amplifier deactivates.
Dual Zone System Setting
<When the Dual Zone System is OFF>
Setting the Front channel and Rear channel sound when the
Dual Zone System is ON.
Display
Setting
"Zone 2 :Rear"
The front is this unit's internal source, and the
rear is Auxiliary input sound.
"Zone 2 :Front" The rear is this unit's internal source, and the
front is Auxiliary input sound.
B.M.S. (Bass Management System)
Adjust the bass boost level of the external amplifier using the
main unit.
Display
"AMP Bass Flat"
"AMP Bass +6"
"AMP Bass +12"
"AMP Bass +18"
• Refer to the catalog or instruction manual for power amplifiers that
can be controlled from this unit.
• For amplifiers there are the model that can be set from Flat to +18
dB, and the model that can be set from Flat to +12 dB.
When an amplifier that can only be set to +12 is connected to the
unit, "AMP Bass +18" won't work correctly even if it's selected.
B.M.S. Frequency Offset
Setting the central frequency boosted by B.M.S.
Display
"AMP Frq :Normal"
"AMP Frq :Low"
— 36 —
Setting
Bass boost level is flat.
Bass boost level is low (+6dB).
Bass boost level is mid (+12dB).
Bass boost level is high (+18dB).
Setting
Boost with the normal central frequency
Drop the normal central frequency 20%
Advertisement
Table of Contents
