Kenwood D-S300 Instruction Manual page 8

Graphical Remote Control Unit (GRC)
8
A remote control unit is not included with this unit.
However, a remote control is supplied with the KENWOOD SERIES 21 "AV CONTROL CENTER" (sold separately).
To enable remote control operation, simply connect this unit, cassette deck (sold separately), and other accessories to the AV
CONTROL CENTER with the system control cords.
1
2
1 Segment screen
This screen is used for selecting the
icons for the main equipment.
2 Menu screen
This screen is used for selecting the
icons for the operating modes.
3 Icons
Icons for the equipment used and
operating mode are displayed.
4 Joystick
The joystick is used when selecting
the icons.
(Lightly press the edge of
3
Main Menu
CD Tuner LD
Return
Cable Sat. TV VCR1
CD
Track 00
Mode
3 7
5 ENTER key
Press this button to input the selected
icon (operation mode, and so on).
6
(ON/STANDBY) key
This key turns ON/STANDBY this unit
or the equipment connected with the
system control cords.
5
.)
Input
Source
Tape1 TapeA
Set Up Confirm
VCR2 TapeB
10key
Pad
REMOTE CONTROL UNIT
7 CD player operation panel
Operation of remote control unit
4
5
ENTER
VOLUME
MUTING
ON /STANDBY
Play/Pause icon (6)
Stop icon (7)
Search icons (1, ¡)
These icons send the track forward or backward.
Mode icon
This icon is used to select the playback mode.
Skip icons (4, ¢)
When selected, the next track in the icon direction is
played.
10key Pad icon
This icon switches to the Numeric Icon menu screen.
D-S300 (En)
6
@
@
#
*
#
#