Normal Play (Track Mode); Playing Tracks In Order From Track No.1 - Kenwood D-S300 Instruction Manual

Normal play (TRACK mode)

Use the following procedure to play a CD in the original order
of tracks from track No. 1.
1 2
Preparation
GRC operation : Complete the procedure in "Basic Operations
for the Graphical Remote Control Unit (GRC)"
Playing tracks in order from track No. 1
1
Turn the unit ON.
MULTIPLE CD PLAYER D-S300
2
Load a disc.
1
MULTIPLE CD PLAYER D-S300
2
Disc tray
3
MULTIPLE CD PLAYER D-S300
3
Start playback.
MULTIPLE CD PLAYER D-S300
To pause playback
MULTIPLE CD PLAYER D-S300
Each press pauses and plays the CD alternately.
90
ON/STANDBY
Open the tray.
0
Place a disc.
Label side
MU LTIP
LE CD
PLA
YER D-S
300
Close the tray.
0
6
6
Lights up.
: Keys and control used in the operations described on this page.
Do not touch the played side of disc.
Loading two discs together will cause malfunctioning.
Place the disc properly along the groove on the tray. (If the disc is not
placed horizontally, malfunction will result.)
A single CD (8 cm disc) can also be played.
Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be
used with this unit.
In the case of a CD-TEXT disc, the disc's title is scrolled on the display.
Lights up.
0
Track NO. being played
In the case of a CD-TEXT disc, the track's title is scrolled on the display.
What is then displayed is in accordance with the TEXT DISPLAY mode.
To stop playback
0 1
MULTIPLE CD PLAYER D-S300
C O L S E
1
Elapsed time of track being played
7
MULTIPLE CD PLAYER D-S300
D-S300 (En)
•
1 : 2 3
%