SOYO SY-7IWM User Manual page 69

Socket 370 celeron processor supported fw82810l agp/pci/amr 66/100 mhz front side bus supported micro atx form factor
Hide thumbs Also See for SY-7IWM:
Table of Contents

Advertisement

BIOS Setup Utility
3-5.6 Onboard Parallel Ports
Onboard Parallel
Ports
Onboard Parallel
Port
Parallel Port Mode
If [Parallel Port Mode] is set to [ECP] mode
ECP Mode use
DMA
If [Parallel Port Mode] is set to [EPP] mode
EPP Mode Select
3-5.7
Others Optional
PWRON After
PWR-Fail
Game Port Address
Setting
Description
Disabled
Choose the printer I/O
address.
378/IRQ7
3BC/IRQ7
278/IRQ5
SPP
The mode depends on your
external device that
EPP
connects to this port.
ECP
ECP+EPP
3
Choose DMA3
1
Choose DMA1
EPP 1.9
Select EPP port type 1.9
EPP 1.7
Select EPP port type 1.7
Setting
Description
On
The system will switch on
when power comes back
after a power failure.
Off
The system will remain off
when power comes back
after a power failure.
Former-Sts
The system will return to
the state it was in before the
power failure when power
returns. (i.e: If the system
was on, it will switch on
again, if it was off, it will
remain off)
Disabled
Set the I/O base address for
the ON board game port
201
under this item.
209
65
SY-7IWM/L
Note
Default
Default
Default
Default
Note
Default
Default

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sy-7iwlSy-7iwm/l

Table of Contents