Av Interface; Displaying The Av I/F 1 Screen; Control During Dvd Video Or Video Cd Playback - Kenwood KVT-627DVD Instruction Manual

Control during DVD Video or Video CD Playback

AV Interface

You can set audio and visual (AV) interface parameters. <KVT-627DVD : AV INPUT1 only>

Displaying the AV I/F 1 screen

AV I/F 1 screen
1
4
3
5
6
2
8
1
66
|
English
1
5
6
7
O n
8
9
1
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (page 78/88)
4 Calls the Setup Menu.
5 Selects a navigation system connection. (
"RGB": Allows the Kenwood's Navigation System
to connect via its interface cable.
"AV-IN1": Allows a third-party navigation system to
connect via the AV INPUT1 port.
"Off": Must be used if no navigation system
is connected. (The navigation display
is cancelled when the AV source is
switched.)
6 Sets a name to be displayed when you select a
system that is connected via the AV INPUT1 port.
( VIDEO1)
• If you have set the navigation system connection to "AV IN1",
the display is fixed to "NAV".
7 Sets an image display of the system that is
connected via the AV INPUT2 port. *
"Off": When the image source is switched, an
image entered via the AV INPUT2 port is
displayed.
"On": When an image signal is entered via the AV
INPUT2 port, this image is displayed.
8 Sets a name to be displayed when you select an
image of the system that is connected via the AV
INPUT2 port. ( VIDEO2)
9 Displays the AV I/F 2 screen.
• If
or to display it.
1
*
• This function can be use AV INPUT1. (KVT-627DVD)
RGB)
1 ( Off)
is not shown, touch