Using Compaq Diagnostics For Windows; Factory Default Settings - Compaq Armada M300 series Maintenance And Service Manual

Using Compaq Diagnostics for Windows

1. Access Compaq Diagnostics for Windows by selecting Start Å Settings Å
Control Panel Å Compaq Diagnostics.
2. To select a category, choose one of two methods:
Select the Categories menu, then select a category from the drop-down list.
Select a category icon on the toolbar.
3. To run diagnostic tests
a) Select the Test tab.
b) In the scroll box, select the category or device you want to test.
c) Select the Quick, Complete, or Custom test type.
d) Select the Interactive or Unattended test mode.
e) Select the Begin Testing button.
f) View test information by selecting a report from the Status, Log, or Error tab.
4. To print the information or save it to a drive, select the File menu, then select Print or
Save As.
5. To exit, select the File menuÅExit.

Factory Default Settings

NOTE: Default settings that do not apply to the computer will appear in gray.
Enable POST Memory Test
Keyboard Num Lock
Hard drive boot sequence
1
2
3
4
Boot display
Language
2-10 Troubleshooting
Table 2-4
Initialization
Checked (enabled)
Unchecked (Off)
Hard drive in the computer MultiBay
Hard drive in the computer hard drive bay
Hard drive in the expansion base or convenience
base half-height/MultiBay
Hard drive in the expansion base or convenience
base MultiBay
Auto
Language of country