Creating Routes - Garmin Quest Owner's Manual

Adding Via Points
Via points are extra stops you'd like to make on your way to a fi nal destination. You can add up to 254
via points. When you have entered all of them, your Quest can arrange them in the most effi cient order so
that you can visit each point without a lot of extra driving.
You can add via points to a route that you are currently navigating or planning, or to routes that you
have previously saved (which you can retrieve and activate from the Route List page). In either case, make
certain you are on the information page for the route you wish to modify, and follow the instructions
below.
To add a Via Point to the Active Route:
1. Use the rocker pad to move down to the 'Via Points' box on the information page of the route you are
modifying.
2. Select '<Select to add via point>.' A window appears with three options for fi nding your location: 'Use
Find Menu,' 'Use Map,' or 'Current Location.'
3. Select one of the three options. For more help on using these options, see Finding Places and Rout-
ing to Them in the previous section of this manual. Once you fi nd an option, it appears on your route
page.
4. To add more via points, repeat steps 2-3 above.
Reference

Creating Routes

Add via points (extra stops) along a route you
have already created.
29