Recording; Listening Through A Receiver (Home Theater) - Samsung 630 series Quick Setup Manual

TV Remote Control Buttons Available in Anynet + Mode
Device Type Operating Status
After switching to the device, when the menu
of the corresponding device is displayed on
Anynet + Device
the screen.
After switching to the device, while playing a
file
Device with built-in After switching to the device, when you are
Tuner watching a TV program
Audio Device When Receiver is activated
N The Anynet + function only works when the active source on the TV remote control is set to TV.
N The J button works only while in the recordable state.
N
You cannot control Anynet + devices using the buttons on the TV. You can control Anynet + devices only using the TV remote
control.
N
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet + device.
N The Anynet + functions do not operate with other manufacturers' products.
N The K, G operations may differ depending on the device.
¦

Recording

You can make a recording of a TV program using a Samsung recorder.
1. Press the TOOLS button. Press the ENTERE button to select
2. Press the or button to select Recording Immediately and press the ENTERE
button. Recording begins.
N
When there is more than one recording device
When multiple recording devices are connected, the recording devices are listed.
Press the or button to select a recording device and press the ENTERE
button. Recording begins.
N
When the recording device is not displayed select
button to search devices
3. Press the EXIT button to exit.
N
You can record the source streams by selecting
N Pressing the J button will record whatever you are currently watching. If you are watching video from another device,
the video from the device is recorded.
N
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
antenna to a recording device, refer to the recording device's users manual.
¦

Listening through a Receiver (Home Theater)

You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTERE button to select
2. Press the or button to select Receiver. Press the
3. Press the EXIT button to exit.
N
If your receiver supports audio only, it may not appear in the device list.
N
The receiver will work when you have properly connected the optical in jack of the
receiver to the DIGITAL AUDIO OUT (OPTICAL)
N
When the receiver (home theater) is set to On, you can hear sound output from
the TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send
out 5.1 channel sound to the Home Theater receiver. When the source is a digital component such as a DVD and is
connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
N
If there is a power interruption to the TV when the
failure), the Speaker Select
Anynet
Device List
Recording: (device_name).
Anynet
or button to select
jack of the TV.
Receiver is set to
may be set to External Speaker when you turn the TV on again.
English - 57
Available Buttons
Numeric buttons
/ / / / ENTERE buttons
Color buttons / EXIT button
K(Backward search) / G(Forward search) /
L(Stop) / H(Play) / I(Pause)
z button
y /
MUTE button
+ (HDMI-CEC).
and press the Red
+ (HDMI-CEC).
On or Off.
On (by disconnecting the power cord or a power
U E R
U E R