Equalizer Control - Kenwood DDX7029 Instruction Manual

6
7
8
9
6 Adjusts the bass boost of the B.M.S power
amplifier (optional accessory).
7 Sets the center frequency of bass boost you
have set for "AMP Bass".
If you set the center frequency to "Low", it
will be dropped approximately 20% to 30%.
8 Adjusts the subwoofer volume.
9 Adjusts the volume of the present source
based on the difference level of original
volume.
p Returns to the original screen.
⁄
• If you have increased the volume first, then reduced the
volume using the "Vol. Offset", the sound generated if
you suddenly switch to another source may be extremely
loud.
• You may not set some models of power amp boost to
"+18". See the catalog or instruction manual of power
amplifier.

Equalizer Control

You can set up the equalizer.
1 Display Equalizer Control
10
Touch [Equalizer] in the Audio Control Menu
(page 84).
2 Display the Equalizer screen
1 Selects an equalizer curve type.
2 Selects items to be adjusted for tone curve
3 Displays the Tone curve setup screen. (page
4 Returns to the original screen.
1
2
You can select any of the following
equalizer curves.
• "Natural"
• "Rock"
• "Pops"
• "Easy"
• "Top40"
• "Jazz"
setup.
If turned "Off", only Level can be setup for
tone curves.
86)
3
4
English 85