Programming The Remote Control - Sony TRINITRON KV-27FA310 Service Manual

Programming the Remote Control

If you have video equipment other than Sony brand (or if you have a Sony DVD/VCR
combination unit) that you want to control with the TV's remote control, use the following
procedure to program the remote control.
1
Check the list of "Manufacturer's Codes" on page 6 and find the three-digit code number
for the manufacturer of your component. If more than one code number is listed, use the
number listed first.
2
Press .
✍
The and
3
Press or
program with the remote control.
✍
You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3.
4
Use the buttons to enter the three-digit manufacturer's code number.
0 9
5
Press .
6
To check if the code number works, aim the TV's remote control at the component and
press on the green POWER button (VCR/DVD, SAT/CABLE, TV) that corresponds with
that component. If it responds, you are done. If not try using another code listed for that
manufacturer.
✍
If you have problems programming your remote control, see "Troubleshooting" on page 42.
FUNCTION button will flash when you press
FUNCTION button to indicate the type of component you want to
.
5