Sony TRINITRON KV-27FA310 Service Manual page 106

Connecting a TV, VCR, Cable/Antenna, and Satellite Receiver
using Composite Video (VIDEO/AUDIO L(MONO), R)
From
cable or
antenna
Satellite antenna
cable
1
Satellite receiver
VIDEO 1 VIDEO 2 VIDEO 1 VIDEO 2
Y
P
B
L L
P
R
R R
6
For Viewing
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the single input jack of the splitter (not supplied) to your incoming cable/antenna
(optional connection to view local channels or broadcast).
3
Using coaxial cables (not supplied), connect the two output jacks of the splitter
(not supplied) to:
a) the IN jack on your satellite receiver
b) the VHF/UHF jack on the TV
4
Using a coaxial cable (not supplied), connect the OUT jack on your satellite receiver to the
VHF/UHF IN on your VCR.
5
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
the AUDIO/VIDEO IN on your TV.
6
Using audio/video cables (not supplied), connect the AUDIO/VIDEO OUT on your
satellite receiver to the AUDIO/VIDEO IN on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏
Program your Sony remote control to operate your VCR or satellite receiver (see page 5).
❏
To activate your remote, press
(FUNCTION button) to operate your satellite receiver.
❏
Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).
2
Optional
Splitter
3b
3a
For Viewing
4
For Recording
LINE
IN
VIDEO AUDIO L AUDIO R
LINE
OUT
(FUNCTION button) to operate your VCR or
Rear of TV
1
S VIDEO
VIDEO
L
(MONO)
R
VCR
5
For Playback
AUDIO OUT
(VAR/FIX)
3
4
Y
P
B
P
R
L L
(MONO)
R R
Video (yellow)
Audio L (white)
Audio R (red)
17