Direct Search; Traffic Information - Kenwood DDX7025 Instruction Manual

Tuner Control

Direct Search

Tunes in a station when its frequency is
entered.
Select a band
1
2 Selects the Direct Search mode
3 Enter a frequency
When you enter them, signal reception starts.
Example: When you receive FM 92.1 MHz
Example: When you receive AM 810 kHz
The operation ends automatically if you do not
operate within 10 seconds.
24 English
—

Traffic Information

When a traffic bulletin starts, any source is
switched to the traffic information and it is
displayed automatically.
When the traffic bulletin starts...
The Traffic Information screen appears automatically.
Traffic Information screen
T U N E R
Audio
1
Set Up
2
D i r e c t
S R C
T r a f f i c I n f o m a t i o n
1 Calls the Sound Effects Menu. (see page 76)
2 Calls the Setup Menu. (see page 47)
During reception of traffic information the
adjusted volume is automatically remembered,
and the next time it switches to traffic
information it's automatically the remembered
volume.
Please note that if DSP unit (optional accessory)
is connected, the volume will be preset by
pressing the
1 3 : 5 0
button for 2 seconds or more.