NEC PA622U User Manual page 238

• Operating the projector (exiting Desktop Control Utility 1.0)
1 Click the projector icon [
2 Click [Exit].
Desktop Control Utility 1.0 will be terminated.
3 Press the EXIT button on the projector unit or on the remote control.
The "network menu" screen will be displayed.
4 Press the MENU button on the projector unit or on the remote control.
The on-screen menu will be displayed.
Select [INPUT TERMINAL] in the sub-menu.
5 Select an input source other than [8:ETHERNET].
] on the taskbar while the desktop screen is displayed.
224
8. User Supportware