Pc With Ethernet Adapter; Connecting To Pc - D-Link DAP-1150 Quick Installation Manual
Wireless access point supporting router mode
Hide thumbs
Also See for DAP-1150:
- User manual (175 pages) ,
- Quick installation manual (87 pages) ,
- User manual (77 pages)
Table of Contents
Advertisement
DAP-1150
CONNECTING TO PC
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between the LAN port located on the back
panel of the access point and the Ethernet port of your PC.
3. Connect the power cord to the power connector port on the back panel of
the access point, then plug the power adapter into an electrical outlet or
power strip.
4. Turn on your PC and wait until your operating system is completely
loaded.
Now you should configure your PC to obtain an IP address automatically (as
DHCP client).
Quick Installation Guide
3
Advertisement
Table of Contents
