D-Link DAP-1150 Quick Installation Manual page 11

Wireless access point supporting router mode

Hide thumbs Also See for DAP-1150:

Table of Contents

DAP-1150

6. In the opened window, in the list of available wireless networks, select the

wireless network DAP-1150 and click the Connect button.

7. Wait for about 20-30 seconds. After the connection is established, the

network icon will be displayed as the signal level scale.

If you perform initial configuration of the access point via Wi-Fi

connection, note that immediately after changing the wireless default

settings of the access point you will need to reconfigure the wireless

connection using the newly specified settings.

Quick Installation Guide

Table of Contents