Slideout Diagram - Jayco 2004 Conventional Travel Owner's Manual

Maintaining Your Investment...
• Use a 3/4" socket and rachet on the hex head located on either end of the drive shaft
and turn the shaft until the slideout is in the position you desire. When the slideout is
fully extended (or retracted), put pressure on the wrench to ensure a tight seal then
return the brake release lever to its normal downward position. This will ensure that
the slideout is locked into a sealed position.
I
WARNING: When the slideout motor brake is released the slideout will
not lock into place, and therefore it will not be sealed from the outdoors!
When the slideout has been retracted, return the brake release lever to its
downward position in order to seal and lock the slideout.

Slideout Diagram

This diagram (Fig. 38) provides an overview of the slideout systems. Your trailer may
contain some or all of the options listed. Slideout #3 is also the layout for a conventional
travel trailer bedroom slideout, but will be located where the fifth-wheel bedroom slideout
drawing is shown.
Base
Stand
Slideout #2-
Fifth-Wheel
Bedroom Slideout
76
Motor
Inner Rail
Outer Rail
(Welded in Frame)
Motor
Drive Shaft
Inner Rail Assembly
Inner Rail Assembly
Drive Shaft
Slideout #3
Motor
(Option)
Outer Rail
(Welded in Frame)
Slideout #1
Fig. 38