Preset Tuning; Channel Scan; Switching Seek Mode; Category And Channel Search - Kenwood KTC-SR902 Instruction Manual

Operations from Model-A Control Unit

Preset Tuning

Calling up the channels in the memory.
1
Select the preset band
Press the [FM] button.
2
Call up the channel
Press the [1] — [6] button.

Channel Scan

Every receivable Channel is checked for 10 seconds.
1
Start Channel Scan
Press the [AUTO] button for at least 2 seconds.
The channel scan will start.
2
Release it when the channel you want to listen to is received
Press the [AUTO] button for at least 2 seconds.

Switching Seek Mode

Sets the seeking mode.
Press the [AUTO] button.
Each time the button is pressed the Seek mode switches as
shown below.
Display Operation
"Channel" Normal manual seeking control.
"Preset" Search in order of the channels in the Preset
memory.
This function cannot be used in the category and channel search
mode.

Category and Channel Search

Select the category and channel you wish to listen to.
<KDC-MP222>
1 Enter category and channel search mode
Press the [FM] button for at least 1 second.
2
Select the category
Press the [FM] or [AM] button.
3
Select the channel
Press the [4] or [¢] button.
Canceling category and channel search mode
Press the [FM] button for at least 1 second.
Entering and canceling the category and channel search mode
with remote
Press the [38] button on the remote.
<Others>
1
Enter category and channel search mode
Press the [38] button.
2
Select the category
Press the [FM] or [AM] button.
3
Select the channel
Press the [4] or [¢] button.
Canceling category and channel search mode
Press the [38] button.
You cannot operate this unit until all the Category information is
acquired.
— 6 —