Kenwood KRC-309S Instruction Manual page 23

Kenwood cassette receiver instruction manual krc-409, krc-309s
Hide thumbs Also See for KRC-309S:
Table of Contents

Advertisement

Troubleshooting Guide
PROBLEM
Can't remove tape.
Free switching of the sound
quality.
If the following situations, consult your nearest service center:
• Even though the disc changer is connected, the Disc Changer Mode is not on, with "AVin" showing in the display during the Changer
Mode.
• Even though no device (
KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82
Mode is entered when switching modes.
POSSIBLE CAUSE
The cause is that more than 10 minutes has elapsed
since the vehicle ACC switch was turned OFF.
The system Q function is set on Scan mode.
The tape can only be removed within 10 minutes of the
ACC switch being turned OFF. If more than 10 minutes
has elapsed, turn the ACC switch ON again and press
the Eject button.
Refer to the "System Q" page and switch it to a
function other than Scan mode.(see p. 6).
— 23 —
SOLUTION
) is connected, the AUX

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Krc-409

Table of Contents