Basic Operations Of Remote Control - Kenwood KMD-PS971R Instruction Manual

Md-receiver
Table of Contents

Advertisement

2WARNING
To prevent accidents, do not attempt to use the steering remote
control whilst turning the steering wheel.
Loading and Replacing the Lithium Battery:
Use one lithium battery (CR2025).
Insert the battery with the
following the illustration.
2WARNING
Store unused lithium batteries out of the reach of children.
Contact a doctor immediately if the battery is accidentally
swallowed.
Basic operations
• SRC button
Each time you press the SRC button, the mode switches as
follows:
Tuner mode
MD mode
External disc control mode 1
External disc control mode 2/AUX mode
Standby mode
NOTE
• The mode switches to the next mode from any mode which
+
and
poles aligned properly,
cannot be used.
• The external disc control mode will differ depending on the unit
that is connected.
• The AUX mode is available only when the changer / AUX
switching adapter (KCA-S210A or CA-C1AX) or CD changer
(KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is
connected to this unit.
During the AUX mode, "AUX" / AUX-name will show in the
display.
When the CA-C1AX is being used, the AUX Mode will replace
the External Disc Control Mode.
• VOLUME buttons
Press the 5 button to turn the volume up.
Press the ∞ button to turn the volume down.
• ATT button
Turns down the volume quickly. To return the volume to its
original level, press the button again. Turning the volume up, or
turning it all the way down deactivates the attenuator function.
Tuner features
• TUNE buttons
Press the 4 button to make decreasing seeks (using the
preset tuning mode).
Press the ¢ button to make increasing seeks (using the preset
tuning mode).
• FM button
Selects and switches between the FM1, FM2 and FM3 bands.
• AM button
Selects the MW and LW bands.
— 39 —

Advertisement

Table of Contents
loading

Table of Contents