Kenwood KMD-PS971R Instruction Manual page 17

Pressing the DISP button or CLK button, the display switches
as follows:
• During vertical division mode display
Upper part display
DISP button
Programme Service name/
Station frequency
Radio text
NOTE
• The same items cannot be selected for both the upper part
and the lower part.
• When the Black Mask function is turned on, the lower part
display shows the clock only.
• During horizontal division mode
Left side display
CLK button
Lower part display
CLK button
Radio text
Spectrum Analyzer1
Spectrum Analyzer2
+ Clock
Spectrum Analyzer2
+ Graphic
Graphic + Clock
Date
Right side display
DISP button
Graphic
Spectrum Analyzer1
Spectrum Analyzer2
Spectrum Analyzer3
Analog clock
Digital clock
NOTE
This function cannot be operated whilst the Black Mask
function is on.
• During the full-screen display mode
The display is switched each time the CLK button is pressed.
NOTE
For information regarding the display items, refer to "Switching
Display" (page 12).
Displaying Frequencies:
Hold down the DISP button for one second or more.
The frequency for the RDS station will be displayed for five
seconds instead of the station name.
NOTE
• Programme Service name / Radio text : only during RDS station
reception.
• If the RDS station currently tuned to is transmitting no text
whilst the Radio Text Display mode is turned on, "NO TEXT" will
appear in the display. Whilst awaiting reception, "WAITING" will
be displayed.
2WARNING
To prevent accidents, drivers should not look at the display whilst
on the road.
— 17 —
Programme Service name/
Station frequency
Band display
+ Preset station number