Honeywell Gas Control And Pilot; Sit - Ipi Gas Control And Pilot; Installing Hfk Fan Kit; Wiring For The Optional Fan Kit - Montigo H42DF Installation & Maintenance Manual

Models
H42DFnI
H42DFLI
HL42DFnI
HL42DFLI
HR42DFnI

Wiring for the optional Fan Kit

All H*42DF* fireplaces may be equipped with optional fan kits for
circulating heat into the living space.
Installations in Canada which employ the fans must be electrically
grounded in accordance with CSa C22.1 Canadian Electrical Code
Part 1 and/or Local Codes.
Installations in the USa which employ the fans must be grounded in
accordance with local codes or, in the absence of local codes, with the
National Electrical Code, anSI/nFPa 70-1987.
For more information see the Fan Kit Installation Guide included with
the fan kit.
XG0148 - 042111
Installation
Figure 21. Wiring for the SIT IPI Wiring Schematic
nOTE: If any of the original wire supplied with the appliance is replaced, it
must be replaced with the same type, or its equivalent.
5/1/60 Supply
G L1 L2
Quick Connect
Figure 21a. Wiring schematic for optional fans.
H*42DF Indoor Gas Fireplace
L2-WH
G
L1-BLK
p g lu to motor
Page 17