Activating Soundtracker - Cobra UK 29 LTD ST Operating Instructions Manual

29 UK-English.qx 6/22/99 12:14 PM
Operation
The SoundTracker
While previous systems only "blanket out" or limit
noise in higher sound frequencies, the revolution-
ary new SoundTracker
Note noise while leaving the signal intact in the recep-
tion mode. In the transmission mode, it actually
SoundTracker™ gives you
strengthens the signal,providing you with a
clearer, cleaner reception to
significant reduction in noise on reception
improve CB communications
and transmission.
while on the air.
Sound clarity is measured by the ratio
of the signal level to the noise level.
The higher the signal-to-noise ratio,
the better the sound.
How SoundTracker
On Reception - "Cuts noise coming in"
With a normal CB, distant signals fall below
the squelch level and are unintelligible. With a
SoundTracker
90%,which increases the signal-to-noise ratio
and dramatically improves signal clarity. This also
allows you to reduce the squelch level significant-
ly, which greatly expands your listening range.
On Transmission - "Strengthens signals going out"
A SoundTracker
signal by more effectively using the available RF
power output of the CB. The result is improved
transmission signal clarity and an expanded
transmission range.
14
Page 14
TM System
System actually reduces
TM
Works
TM
TM CB, the noise level is cut by up to
CB strengthens the transmit
TM

Activating SoundTracker™

1 Push and release the ST button. Red LED
is illuminated when SoundTracker™ is
turned on.
Operation
Activating
™
SoundTracker
15