Honda Civic Hybrid 2004 Online Reference Owner's Manual page 42

Rigid type
3. Place the child seat on the vehicle
seat, and attach the seat to the
lower anchors according to the
child seat maker's instructions.
Some LATCH-compatible seats
have a rigid-type connection as
shown above.
Flexible type
Other LATCH-compatible seats have
a flexible-type connection as shown
above.
Whatever type you have, follow
4.
the child seat maker's instructions
for adjusting or tightening the fit.
5. Lift the rear head restraint, then
route the tether strap over the
seat-back between the legs of the
head restraint, making sure the
strap is not twisted.
Installing a Child Seat
TETHER STRAP
HOOK Front
ANCHORAGE
POINT
6. Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
7. Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Driver and Passenger Safety
39