Table of Contents
Advertisement
Lights
HOLDING CLIP
1.
Open the hood.
If you need to change the
headlight bulb on the driver's side,
remove the holding clip from the
stay with a flat-tipped screwdriver,
then remove the upper part of the
washer fluid reservoir tank by
pulling it out.
162
Maintenance
BULB
CONNECTOR
2.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
3.
Remove the bulb by turning it one-
quarter turn counterclockwise.
4.
Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
5.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
6.
Turn on the headlights to test the
new bulb.
TAB
7.
(Driver's side)
Reinstall the upper part of the
windshield washer reservoir.
Install the holding clip on the stay
and lock it by pushing on the
center of clip.
Hide quick links:
Advertisement
Chapters
Table of Contents
