Kenwood KDC-C462 Instruction Manual page 5

Connections
"O"
"N"
O - N
2
CAUTION
• Do not connect the changer control cable while the control unit is turned ON.
• Be sure to press the reset button after installation.
• Do not install an antenna of radio equipment or distribute the antenna cable near the changer output
cable, for this could cause malfunction with this unit.
Setting the O-N switch
Set the O-N switch (lying to the right of the EJECT key) depending on the unit connected, as follows:
Control unit
Changer switching
unit
O-N switch setting
• Consult the instruction manual for your control unit to check whether or not it is CD text capable.
That information can be found on the page for External Disc Control in the section concerning
switching to "N."
• In the "N"-operation mode, the disc titles and track titles provided by the CD text function can be
displayed. (only KDC-C712/C662)
D Changer control cable (5m)
CD text-capable
None KCA-S210A
N N
Changer control terminal
Control unit (optional)
Not CD text-capable
None KCA-S210A
O
KCA-S200
O O
5