Siemens SR640XA User Manual page 2

Copyright © 2013 RuggedCom Inc.
All rights reserved. Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized
except where expressly permitted. Violations are liable for damages. All rights reserved, particularly for the purposes of patent application or
trademark registration.
This document contains proprietary information, which is protected by copyright. All rights are reserved. No part of this document may be
photocopied, reproduced or translated to another language without the prior written consent of RuggedCom Inc.
Disclaimer Of Liability
Siemens has verified the contents of this manual against the hardware and/or software described. However, deviations between the product
and the documentation may exist.
Siemens shall not be liable for any errors or omissions contained herein or for consequential damages in connection with the furnishing,
performance, or use of this material.
The information given in this document is reviewed regularly and any necessary corrections will be included in subsequent editions. We
appreciate any suggested improvements. We reserve the right to make technical improvements without notice.
Registered Trademarks
ROX™, Rugged Operating System On Linux™, CrossBow™ and eLAN™ are trademarks of Siemens AG. ROS® is a registered trademark of
Siemens AG.
OpenNMS® is a registered trademark of The OpenNMS Group, Inc.
Microsoft Windows XP and Microsoft Windows 7 are registered trademarks of Microsoft Corporation in the United States and other countries.
Other designations in this manual might be trademarks whose use by third parties for their own purposes would infringe the rights of the
owner.
Security Information
Siemens provides automation and drive products with industrial security functions that support the secure operation of plants or machines.
They are an important component in a holistic industrial security concept. With this in mind, our products undergo continuous development.
We therefore recommend that you keep yourself informed with respect to our product updates. Please find further information and newsletters
on this subject at: http://support.automation.siemens.com.
To ensure the secure operation of a plant or machine it is also necessary to take suitable preventive action (e.g. cell protection concept) and
to integrate the automation and drive components into a state-of-the-art holistic industrial security concept for the entire plant or machine.
Any third-party products that may be in use must also be taken into account. Please find further information at:
industrialsecurity.
Contacting Siemens
Address
Siemens AG
Industry Sector
300 Applewood Crescent
Concord, Ontario
Canada, L4K 5C7
ii
Telephone
Toll-free: 1 888 264 0006
Tel: +1 905 856 5288
Fax: +1 905 856 1995
Application Note
http://www.siemens.com/
E-mail
RuggedSales@RuggedCom.com
Web
www.RuggedCom.com
RUGGEDCOM