Kenwood DPX313 Instruction Manual page 27

For operating KCA-BT100 (Optional)
However, the following control methods of the
function for this unit may be different from the
Instruction manual; therefore, refer to the following
supplemental instruction.
<Deleting a Registered Cell-Phone>
1–3. Operation is the same. Refer to the instruction
manual of KCA-BT100.
4. Press the Control knob.
5. Select "YES" using the Control knob.
6. Press the Control knob.
7. Press the [FNC] button.
<Menu System>
For how to operate Menu, refer to <Function
Control> in this instruction manual.
About display
Cell-Phone Status is displayed in the status display of
this unit.
Moreover, some displays are different from the
description of KCA-BT100 Instruction Manual.
Displays of KCA-BT100 Instruction
Manual
"Disconnect"
"Connect"
"Phone Delete"
"Phone Status"
BT : Displays the bluetooth connection status.
This indicator turns on when a cell-phone is
connected to this unit.
Actual displays on this unit
"HF Disconnect"
"HF Connect"
"Device Delete"
"BT DVC Status"
Function Control Glossary
• SRC Select
Setting up the Source Select mode.
1 : Displays source icons for your choice.
2 : Allows you to select sources one after another.
• Display
If this unit is not operated at least 5 seconds with
"OFF" selected, the display turns off. During a setup
mode, the display will not turn off even if 5 seconds
lapse.
• ILM Dimmer (illumination dimmer)
Reduces the key Illumination brightness.
AUTO: Dims the illumination in conjunction with
the Light switch of the vehicle.
MNAL: Dims the illumination constantly.
OFF: Does not dim the illumination.
• AT COL CHG (Automatic illumination color
change)
Selecting "iPod" changes the key illumination
automatically according to the color of the iPod
body during playback of the iPod source.
* The color of key illumination is only a
recommended color by our campany. It does not
necessarily match the body color of iPod.
Compatible iPod models:
iPod (5th generation), iPod classic, iPod touch,
iPod nano (1st/2nd/3rd generation),
Fifth Generation iPod (iPod with video)
• SWPRE (Switching Preout)
Switches the preout between rear output ("Rear")
and subwoofer output ("Sub-W").
• AMP
Selecting "OFF" turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
Selecting "OFF" disables the functions of the Dual
Zone and KCA-BT100 (optional accessory) because
no sound will be output from the front speakers.
• Zone2 (Dual Zone)
Set the destination (front speaker "Front" or rear
speaker "Rear") of the sub source (AUX IN) when the
Dual Zone function is turned on.
• Supreme
Technology to extrapolate and supplement with
proprietary algorithm, the high-frequency range
that is cut off when encoding at low bit rate (less
than 128Kbps, Sampling frequency is 44.1kHz).
Supplementing is optimized by compression
format (AAC, MP3 or WMA) and processed
according to bit rate.
The effect is negligible with music that is encoded
at high bit rate, variable bit rate or has minimal high
frequency range.
27
|
English