Taking The Next Steps - Bose LIFESTYLE DVD Operating Manual

BASIC SYSTEM CONNECTIONS
Figure 21
Media center connection panel
Using the AOAPTiQ®
calibration headset
2. Put on the headset so it rests above your ears. In this position, it can listen (as you would)
and take sampling measurements in your room during the ADAPTiQ audio calibration
process.
3. Follow the calibration process as directed on the TV screen.
Save the headset for possible future use
Keep the headset and discs together in their original carton and store them in a safe location.
You may want to customize your system again if you move it to another room or significantly
change the arrangement of the room by relocating furniture, the speakers, or the
Acoustimass® module. You can reuse the ADAPTiQ system at any time.
Taking the next steps
This completes the basic connection of your system and TV.
Now you can:
• Install the TV on/off sensor, following instructions in the next section of this guide.
• Connect other components to the system, as instructed in "Optional Connections and
Additions" on page 26 of this guide.
• Use the system as it is now set up. Refer to your Operating Guide for details.
24