Program Writing To The Flash Rom (Ic23) After Replacement - Technics SL-DZ1200PP Service Manual

Direct drive digital turntable

Hide thumbs Also See for SL-DZ1200PP:

Table of Contents

11.2. Program Writing to the Flash ROM (IC23) after Replacement

1. Insert the SD card to which the program has been written into the SD Memory card slot.

2. Switch on the power while keeping the CUE PADS buttons {1}, {2}, {3}, and {4} all pressed.

3. The lamps of the CUE PADS {1} and {2} light and writing to the flash ROM (IC23) starts.

4. Afterwards, the CUE PADS {3} and {4} automatically light in sequence, and finally the lamps of all CUE PADS/SAMPLE PADS

light and writing is completed.

Note:

The flash ROM can be destroyed when the power is switched off during writing. Do not switch off the power until writing has

been completed.

Please wait for about 2 minutes until writing has been completed.

SL-DZ1200PP / SL-DZ1200EB / SL-DZ1200EG / SL-DZ1200EP / SL-DZ1200GN

Table of Contents

Sl-dz1200eb Sl-dz1200eg Sl-dz1200ep Sl-dz1200gn