Adding An M7; Adding An Extra M7 To A Hub That Is Connected To An M7 - Samsung WAM750 User Manual

Adding an M7

A
Before adding an M7, unplug all M7s that are connected to the Multiroom app.
•
If you add a new HUB and an extra M7 and connect them to the same wireless
•
router that an existing M7 is connected to, the existing M7 will disappear from the
Multiroom app. To re-connect the existing M7, connect it to the newly added HUB.

Adding an extra M7 to a HUB that is connected to an M7

❚
Press the
1
(The Pairing indicator on the front of the HUB will blink.)
NOTE
The pairing indicator (
9
indicator is flashing.
Plug the M7 you are adding into an electrical outlet, and then press the
2
Add
button on the back of the M7.
When the M7 connects to the HUB, the M7 beeps or sounds, and the M7's
LED indicator stops flashing.
On your smart device, select the
3
NOTE
After pairing is complete, the M7 naming screen appears. Edit the name or enter a name
9
of your own choosing.
40
44 44
SPK Add
button on the back of the HUB.
) flashes during the pairing mode. You plug in M7 whille the
Samsung Multiroom
SPK
app. Setup starts.