Panel Color Coordinate - Kenwood DNX5120 Instruction Manual

t Selects a picture display time. (
The Display of a JPEG picture is changed.
("Short", "Middle", "Long")

Panel Color Coordinate

Sets the screen and button illumination color.
1 Display the Panel Color Coordinate screen
See <System Setup> (page 60).
2 Select a color
1
2
1 Sets to the touched color.
2 Sets and registers favorite color.
3 Returns to the "System Setup 2" screen.
To register your original color
1 Start the RGB coordinate
2 Adjust the each color value
2
3
4
1
1 Selects a preset number to register.
2 Adjusts the Red value.
3 Adjusts the Green value.
4 Adjusts the Blue.
"Middle")
5 Returns to the "Panel Color Coordinate"
3 Select a Preset number to register
Adjusted color is registered to the selected
Preset button.
4 Complete the color coordination
3
5
#
: Press for # seconds.
screen.
English 61