RocketFish RF-MRBTAD User Manual page 22

08-1322_RF-MRBTAD_COMBINED.fm Page 22 Tuesday, May 13, 2008 2:09 PM
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does not cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• (1) Reorient or relocate the receiving antenna,
• (2) Increase the separation between the equipment and receiver,
• (3) Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected,
• (4) Consult the dealer or an experienced radio/TV technician for help.
Interference Notice
Bluetooth products are a radio device that might cause
interference with other non-Bluetooth devices (for instance,
devices using wireless LAN). 802.11b technology might cause
degradation on the performance of Bluetooth devices.
Caution:
1 To comply with FCC RF exposure compliance requirements, a
separation distance of at least 20 cm must be maintained
between the antenna of this device and all persons.
2 This Transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
22